Fast, Reliable Gate Parts & Welding Across Pleasanton
Gate parts and welding repair in Pleasanton typically runs $180–$650 depending on whether you need hinge work, post reset, or full custom fabrication, and most jobs are completed in a single visit. We carry common parts and welding equipment on every truck so your ranch gate or cattle entry isn’t left hanging open overnight.
We’re Landmark Gate Repair Service San Antonio, and we’ve been making the drive down Highway 281 to Pleasanton for years. Joseph Taylor, our owner and lead technician, handles these jobs personally — not some subcontractor you’ve never met. We know the difference between a suburban ornamental gate and the welded pipe ranch gates that dominate Atascosa County acreage. From the in-town ranch-style homes near downtown to the working cattle operations off FM 3350 and FM 1335, we’ve reset posts, re-hung gates, and fabricated repairs where the nearest “gate company” was three counties away. Call us at (866) 665-0423 for a free estimate — we’ll tell you straight whether it’s a weld, a part, or a full post replacement.
Why Landmark Gate Repair Service San Antonio Is Pleasanton’s Preferred Gate Parts & Welding Company
Our Gate Parts & Welding team has built a reputation in Pleasanton by showing up prepared. Joseph Taylor has 14 years focused exclusively on gates — not fencing, not garage doors, not general handyman work. That matters when you’re dealing with a 16-foot welded pipe gate that won’t latch because clay-caliche soil shifted it three inches after last week’s rain.
We’ve earned 319 verified customer reviews averaging 4.8 stars, and Pleasanton property managers and ranch owners make up a growing share of that feedback. They mention the same things: Joseph arrived with the right parts, didn’t have to “come back next week,” and understood that a gate hanging open on a rural property isn’t just inconvenient — it’s a liability with livestock and equipment.
Response time to Pleasanton is typically same-day or next-morning. We’re based in San Antonio, but we route trucks south on 281 regularly, and we don’t treat Atascosa County like a distant afterthought. We know which FM roads see the heaviest oilfield truck traffic, where the soil shifts worst after drought, and why a hinge that held fine in April might be binding by July.
Our Gate Parts & Welding Services in Pleasanton
Hinge Replacement
Pleasanton’s semi-arid South Texas climate is brutal on gate hinges. Extreme UV and humidity oxidize bare steel fast, and the weld integrity degrades before you notice the sag. On older welded pipe gates common in Atascosa County ranchland, we see hinge pins seized solid, barrel hinges cracked at the weld, and adjustable hinges that have been “fixed” three times with a bigger hammer. A typical hinge replacement on a standard ranch gate in Pleasanton runs $180–$320, including removal of the old hardware, surface prep, and welding or bolting the new hinge with proper alignment. For heavy cattle gates with custom-fabricated hinge assemblies, we’ll weld in-house to match your existing gate geometry.
Post Replacement
This is our most frequent call in the Pleasanton area — and it’s not even close. The Eagle Ford Shale oilfield sends heavy haul trucks down FM roads adjacent to ranch properties, and those trucks clip gate posts with depressing regularity. Layer on top of that the clay-caliche soil mix that shrinks during drought and heaves after rain, and you’ve got posts that lean, twist, or shear off entirely. Post replacement in Pleasanton typically costs $350–$650 depending on depth, concrete work, and whether we’re resetting an existing gate or hanging a new one. We set posts below the frost line with proper drainage, and we weld post caps and gusset plates in-house to match your gate’s original fabrication. One trip. No waiting on a third-party welder.
Rail Repair
Welded pipe gates take abuse — livestock pressure, equipment contact, and the slow fatigue of daily operation. When a horizontal rail cracks at the weld or a diagonal brace fails, the gate goes out of square and the latch won’t meet the catch. We cut out the damaged section, fabricate a replacement from matching steel, and weld it with proper penetration and weatherproofing. Rail repair in Pleasanton generally runs $220–$400. We match the existing wall thickness and finish so the repair doesn’t become the weak point.
Custom Welding & Fabrication
Not every Pleasanton gate matches a catalog part. Working cattle operations often need custom latch mechanisms, extended striker plates, or reinforced corners where standard hardware won’t survive the season. Joseph Taylor welds these in-house — on your property, on the truck, or back at our San Antonio shop for complex jobs. Custom welding in Pleasanton starts around $280 for straightforward fabrication and scales with material and complexity. We’ve built everything from oilfield-security gate reinforcements to custom cattle-gate latches that survive 500-pound bull contact.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pleasanton
We service and stock parts for Viking, Ghost Controls, DoorKing, Elite, and five other major brands — meaning we can repair the operator you already own instead of pushing a replacement you don’t need. For Pleasanton customers, this matters because rural gate operators work harder than suburban units: longer cycles, heavier gates, more dust and vibration. A Ghost Controls heavy-duty swing operator on a cattle gate off Pleasanton’s loop sees a different life than the same model on a city driveway. We factor that in when we diagnose. Parts we don’t stock typically arrive within 24–48 hours, but our trucks carry the common failure items — capacitors, limit switches, gear assemblies, control boards — so most Pleasanton jobs don’t wait on shipping.
Common Gate Parts & Welding Problems We See in Pleasanton Homes
- Collision damage from oilfield trucks on county roads. FM 1335, FM 3350, and other Eagle Ford corridor roads see heavy service truck traffic that clips gate posts with surprising frequency. We reset posts, straighten or replace rails, and re-hang gates that have been knocked completely off their hinges.
- Rusted hinge and latch mechanisms from extreme UV and humidity. Pleasanton’s sun exposure oxidizes bare steel faster than coastal humidity alone would predict. We replace with zinc-coated or stainless hardware where the budget allows, and we weld on protective caps to extend service life.
- Gate post shift and latch binding from clay-caliche soil heave. The soil around Pleasanton shrinks dramatically in drought, then swells and heaves after rain. Posts that were plumb in March lean by August, and the latch misses the catch by an inch. We reset with proper depth, drainage, and sometimes concrete collars to stabilize against the next cycle.
- Weld fatigue on older pipe gates. Gates fabricated fifteen or twenty years ago — common on established Pleasanton ranches — often show cracks at stress points where original welds lacked penetration or have corroded from the inside out. We grind out, re-weld, and dress these repairs to outlast the original.
Pricing for Gate Parts & Welding in Pleasanton, TX
| Service | Typical Range in Pleasanton |
|---|---|
| Hinge replacement (standard ranch gate) | $180 – $320 |
| Hinge replacement (heavy cattle gate, custom weld) | $280 – $450 |
| Rail repair (cut, fabricate, weld) | $220 – $400 |
| Post reset (straighten, re-plumb, no replacement) | $200 – $350 |
| Post replacement (remove, set new, re-hang gate) | $350 – $650 |
| Custom welding / fabrication | $280 – $600+ |
| Gate roller / wheel replacement | $150 – $280 |
| Latch & lock mechanism repair | $120 – $260 |
These Pleasanton ranges reflect real jobs we’ve completed in Atascosa County. Final cost depends on gate size, material thickness, access for our welding equipment, and whether we’re working with salvageable hardware or starting fresh. We don’t quote low to get in the door — we tell you what it actually takes to fix it right. Estimates are free, and we’ll walk the gate with you before any work starts. Call (866) 665-0423 to schedule.
We Also Serve Cities Near Pleasanton
Our service radius covers the full Eagle Ford corridor and northern Atascosa County. We regularly handle gate parts and welding for customers in Floresville, Lackland Air Force Base, San Antonio, and Alamo Heights — each with their own gate types and local conditions, but all receiving the same direct service from Joseph Taylor and our equipped trucks.
Serving Pleasanton, TX — Our Local Coverage Area
We’re based in the Pleasanton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in Pleasanton
Your hinges aren’t the real problem — it’s your gate posts shifting in the clay-caliche soil. After drought, that soil shrinks and creates voids; when rain finally comes, the soil swells and heaves, tilting posts out of plumb. The hinge itself may be fine, but the misalignment creates binding that feels like a hinge failure. We reset posts with proper drainage and sometimes add concrete collars to resist the next heave cycle. Call (866) 665-0423 and we’ll diagnose whether it’s a post issue, a hinge issue, or both — estimates are free.
Yes — collision damage from oilfield trucks is one of our most common Pleasanton calls. On a recent job off FM 3350, we replaced a sheared hinge pin and a bent LiftMaster slide gate operator on a rancher’s pipe entryway. The clay-caliche soil had heaved after a rain, and the heavy oilfield truck impact had knocked the post a full three inches out of plumb. We reset the post, reinforced the weld, and had the gate swinging freely in one trip. If your gate is hit off FM 1335 or any county road near Pleasanton, we can assess structural damage, replace bent components, and weld repairs in-house. Call (866) 665-0423 for same-day or next-morning response.
For heavy cattle gates in the Eagle Ford corridor, we typically recommend Viking or Ghost Controls heavy-duty swing operators — both brands we service, stock parts for, and have installed on dozens of Atascosa County ranches. The key is matching operator capacity to actual gate weight and wind load, not just gate length. A 16-foot welded pipe gate can weigh 400+ pounds, and the sustained winds across open ranchland add load that suburban operators aren’t built for. We size the unit, set proper limit switches, and fabricate custom mounting brackets if your post geometry is non-standard. Call (866) 665-0423 to spec the right operator for your gate.
We stock torsion and extension springs for standard gate sizes, and for a 16-foot ranch gate off Pleasanton’s loop, we typically fabricate or source heavy-duty springs matched to the gate weight and cycle frequency. Most 16-foot welded pipe gates need springs rated well above residential spec — often 200+ pound capacity with high-cycle coating for the dust and UV exposure common in Atascosa County. If we don’t have the exact spring on the truck, we can usually source it within 24 hours or fabricate a custom solution. Call (866) 665-0423 with your gate dimensions and we’ll confirm availability.
Post replacement on a farm gate in Atascosa County typically runs $350–$650, with most Pleasanton-area jobs falling in the $400–$550 range. Cost depends on post size and depth, whether we’re dealing with clay-caliche soil that requires extra excavation or rock breaking, concrete work for stability, and whether the gate itself needs re-hanging or repair after the post replacement. Oilfield truck collision damage sometimes adds bent rail or hinge work that pushes the total toward the upper end. We give exact quotes after seeing the job — call (866) 665-0423 for a free estimate.
Ready to get your Pleasanton gate working right? Whether it’s a binding hinge, a sheared post, or custom fabrication for a working cattle operation, Joseph Taylor handles every job personally — with the parts, welding equipment, and 14 years of gate-specific experience to finish in one trip. No subcontractors. No waiting on outside welders. Just straight answers and work that holds up to South Texas conditions.
Call (866) 665-0423 now for a free estimate. We route to Pleasanton same-day or next-morning, and we’ll tell you honestly whether your gate needs a quick weld or a full rebuild.
Written by Joseph Taylor, Owner at Landmark Gate Repair Service San Antonio, serving Pleasanton and Atascosa County since 2010.